Paxar Monarch 9433 - Manual (Page 36)

3-6 System Administrator’s Guide
P r i n t e r
Use this menu to change your printer's contrast, print positions, and
enable or disable the various sensors (on-demand, black mark, etc.).
Setup Menu
To exit, press F at any time.
Adjusting the Print Contrast
Contrast controls the darkness of the printing on your supply. The range
is between -28 to 40. The default is 0.
You may need to adjust your contrast based on which supply you are
using. Linerless supplies may need a higher or lower contrast setting.
Receipt paper requires a lower contrast setting.
For linerless or synthetic supplies, you must select High Energy from the
Stock Energy menu.
Diagnostics Online Diag. Setup Service File System Exit
Stock Energy Backlight LCD Contrast Printer Serial Comm. RF Network Bluetooth Exit Power Mgmt.
Contrast Supply Pos Print Pos Demand Sensor Stock Sensor Exit Margin Adj