Paxar Monarch 9433 - Manual (Page 48)

3-18 System Administrator’s Guide
3. Load the supply by placing the supply across the exit chute.
4. Close the supply door.
5. Press A under ↵ icon to continue. You see a message that the
printer is calibrating the supply.
SUCCESSFUL
↵ X
The printer does not feed supplies while calibrating. The printer
records the sensor value read from the label on the liner.
6. Press A under ↵ or press A under X to return to the Stock Sensor
menu.
7. Press F to return to the Printer menu.
Exit chute