Paxar Monarch 9433 - Manual (Page 46)

3-16 System Administrator’s Guide
Note: If you get a FAILED message: turn off the printer and repeat the
process. If it fails again, call Service.
6. Press A under ↵ or press A under X to return to the Stock Sensor
menu.
7. Press F to return to the Printer menu.
Selecting the Black Mark Sensor
1. From the Printer menu, select Stock Sensor, Black Mark.
Black Mark Sensor
Selected
↵
2. Press A under ↵.
Insert label...
Then hit Enter
↵ ±
3. Load the supply by placing the supply across the exit chute without a
black mark covering the sensor.
Black mark sensor