Precor Elliptical Fitness Crosstrainer EFX - Manual (Page 14)

536i Elliptical Fitness CrossTrainer Assembly Guide 12
Before exercising, make sure the EFX is level and does not
wobble from side to side.
Important: If the EFX is placed on a slightly uneven surface,
turning the levelers can help, but will not compensate for
extremely uneven surfaces.
1. Remove the packaging wedge from beneath the base of
the EFX.
2. Kneel by the side of the stabilizer and lift the base slightly so
you can access the levelers.
3. Rotate the levelers as needed.
4. When the EFX is level, tighten the lock nut with a crescent
wrench and lower the EFX to the floor.
Verify the heart rate display is operational.
1. Hold on to a stationary handrail and step on the foot pedals.
2. When you are comfortably situated, begin pedaling. A pedaling
speed above 40 strides per minute must be maintained for
several seconds.
3. Grasp both touch-sensitive grips.
4. Look at the HEART RATE display. After a few seconds, a
number appears indicating your heart rate.
5. If a number does not appear in the HEART RATE display, you
may need to disassemble the display and check the cable
connection. For troubleshooting tips, refer to the Product
Owner’s Manual.