Precor Elliptical Fitness Crosstrainer EFX - Manual (Page 83)

Product Owner's Manual: Club Features 21
Treadmill: Selecting Safety Code
Protection
When the equipment is shipped from the factory, the safety code
protection feature is disabled. If you enable the safety code, your
patrons will need to enter four number keys in sequence to begin
their exercise session and, on the treadmill, start the running belt. If
the correct keys are not pressed within two minutes, further access
is denied. For more information, refer to Entering the Safety Code.
1.
At the
S A F E T Y C O D E prompt, press OK. Use the navigational
arrow keys to alternate between the two selections.
Setting Description
E N A B L E D Causes the safety code prompt to appear prior to a
workout and when returning from pause mode.
D I S A B L E D Does not require a safety code to operate.
CAUTION: Do not assume the equipment is safe because of
safety code protection. Never leave children unsupervised
around the equipment.
2.
When you are ready, press OK to accept the displayed setting
and move to the next feature. For further options, refer to the
table in Changing the Product Settings.
Choosing a Language
The equipment can display user prompts, text, and user entries in
several different languages. When the equipment is shipped from
the factory, the default language is English.
Note: Programming prompts are not affected by language
selection. The prompts in this section continue to appear in
English.
To choose a language:
1.
At the
S E L E C T L A N G U A G E prompt
, press OK. Use the
navigational arrow keys to choose a language.
2.
Press OK again to accept the displayed setting and move to the
next feature.