Polycom SpectraLink 8030 - Manual (Page 41)

SpectraLink Wireless Telephone Configuration
PN: 1725-36038-001_E.doc 41
handset. The Restart on Error option will cause the handset to make
every effort to reboot quietly and quickly to standby mode. In either
scenario, a call in progress will be lost. Restart On Error should be used
unless specific error conditions are being investigated.
Error detail may be shown on the display, captured by the syslog
server and may also be available for downloading with the Handset
Administration Tool. An error memory dump can be taken and sent
to Customer Service for escalation and analysis.
Restore Defaults
The Restore Defaults option will set all user and administrative
parameters except Telephony Protocol to their factory defaults.
Graphics Demo
The Graphics Demo option starts a demonstration of the handset’s OAI
graphical capabilities immediately upon selection.