Polycom SpectraLink 8030 - Manual (Page 91)

Using the SIP Handset
PN: 1725-36038-001_E.doc 91
If you want to… Then…
Enter a new name
and number in the
phonebook
1 Open the phonebook.
2 Select the <new> option (if available) and press the Edit softkey to open the
Enter Number display.
3 Enter the name and number by following the steps for editing a name and
number. You must enter alphanumeric characters for the name, not blank
spaces.
Delete a phonebook
entry
1 Open the phonebook and select the entry.
2 Press
the Del softkey to delete the entry.
Open the speed dial
list from standby
Press the Spdl softkey from standby mode.
View the system
speed dial number
If the system speed dial key has been programmed, it will be listed as the first
entry with a close bracket (>) as the first character. It is assigned to number 1.
Only the system administrator may change this entry.
Make a speed dial call 1 From standby or while in the speed dial menu, press and hold the
corresponding number key on the keypad for one second. The system
speed dial key must be pressed for three seconds.
2 The handset will display the name and number for one second before the
call is dialed. You may press END during this second to terminate the call.
(You may also use the Nav keys to highlight an entry and then press START
or the Spkr softkey to dial the number.)
If you do not place a call, you may return to standby by pressing the Exit softkey.