Polycom SpectraLink 8030 - Manual (Page 93)

Using the SIP Handset
PN: 1725-36038-001_E.doc 93
If you want to… Then…
From the phonebook view number display:
1 Press the Spdl softkey from the view number display in the phonebook.
2 When the speed dial list opens, navigate to an empty slot and press
NavOK. This sets the speed dial key to the number in the phonebook.
3 Press END to exit to standby mode and save the speed dial number
assignment.
Speed dial entries may be edited through the phonebook, as described above.
Push to Talk [the PTT Vibrate feature has been added]
PTT Vibrate To enhance the alerting of a PTT call, PTT Vibrate may be enabled. When PTT
Vibrate is enabled, the handset will vibrate three times whenever a PTT
broadcast is received, whether the handset is in standby or in a call. If in a call,
the chirp alert will also sound. The vibration does not replace any PTT tone
volume already set. To set the handset for PTT vibrate only, enable PTT Vibrate
and set the tone volume to zero.
PTT Vibrate is disabled by default.