Panasonic WV-CLR920A - Manual (Page 28)

-28-
1. Camera Identification (CAMERA ID)
Setting
Move the cursor to N of CAMERA. You can use the
camera identification (CAMERA ID) menu to assign a
name to the camera. The camera ID consists of up to
16 alphanumeric characters. The camera ID display
can be switched on or off on the monitor screen.
SETTING PROCEDURES
Character Cursor
Pointer
Character
Area
Command
Editing
Area
CAMERA ID menu
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ДЬЦЖСЕ
SPACE
POSI RET END RESET
................ ** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON(DNR-H)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC
END
↵
↵
↵
↵
Camera ID ON/OFF
Move the cursor to CAMERA ID, and select ON or OFF.
ON: Displays the camera ID in the specified position on
the monitor.
OFF: Does not display.
To edit the CAMERA ID
1. Press I. The CAMERA ID menu appears. The
cursor on the letter “0” is highlighted.
** SET UP **
CAMERA
RS485
END SET UP DISABLE
↵
↵