Panasonic WV-CLR920A - Manual (Page 19)

-19-
Fixing Screws
Mount Adapter
• Mounting from the top
Remove the mount adapter from the bottom of the
camera by removing the two fixing screws. Attach
the mount adapter to the top as shown in the dia-
gram, then mount the camera on the mounting
bracket.
Use the two original screws to attach the mount
adapter to the camera. Using shorter ones may
cause the camera to fall down, and using longer
ones may damage the inside of the camera.
Using excessively short screws may cause camera
drop.
INSTALLATION OF CAMERA