Panasonic WV-CLR920A - Manual (Page 23)

2. SETUP OPERATION
This camera utilizes a user setup menu (CAM SET UP)
that is displayed on the monitor.
To set items on the CAM SET UP menu, use the follow-
ing buttons on the side panel.
Up Button (
J):
Moves the cursor upwards. Use
this button to select an item or
adjust the parameters.
Down Button (
K): Moves the cursor downwards. Use
this button to select an item or
adjust the parameters.
Right Button ( M): Moves the cursor to the right. Use
this button to select or adjust the
parameters of the selected item.
The parameter changes each time
this button is pressed.
-23-
Left Button
Set Button
Right Button
Down Button
Up Button
Left Button (
L):
Moves the cursor to the left. Use
this button to select or adjust the
parameters of the selected item.
The parameter changes each time
this button is pressed.
Set Button (
I):
Executes selection and displays a
submenu for an item with
N mark.
• To reset the parameter of an item to the factory
default setting, move the cursor to that row and
press
L and M simultaneously.
• To return to the previous menu or page, move the
cursor to RET and press I.
• To close the setup menu, move the cursor to END
and press
I.
• All Reset Operation
All reset allows you to reset all adjustments and para-
meters to the factory default settings.
(1) Make sure that the setup menu is not displayed (a
camera picture is displayed).
(2) While pressing both L and M, press I for a
few seconds. The message ALL RESET momentari-
ly appears on the monitor.