Prevention of blooming and smear, Specifications – Panasonic WV-CLR920A User Manual
Page 47
Pick-up Device:
762 (H) x 582 (V) pixels, Interline Transfer CCD
Scanning Area:
6.45 (H) x 4.84 (V) mm (Equivalent to scanning area of 1/2” pick-up tube)
Scanning:
625 lines/50 fields/25 frames
Horizontal:
15.625 kHz
Vertical:
50 Hz
Synchronization:
Internal, Line-locked, External (VS/VBS) or
Multiplexed Vertical Drive (VD2) selectable
Video Output:
1.0 V[p-p] PAL composite 75
Ω/BNC connector
Horizontal Resolution:
480 lines (C/L), 570 lines (B/W)
Signal-to-Noise Ratio:
50 dB (AGC OFF, weight ON)
Minimum Illumination:
0.14 lx (0.014 footcandle) at F1.4 (C/L), 0.01 lx (0.001 footcandle) at F1.4 (B/W)
Gain Control:
AGC ON or OFF selectable (SET UP MENU)
White Balance:
ATW1, ATW2 or AWC selectable (SET UP MENU)
Aperture:
Variable (SET UP MENU)
-47-
SPECIFICATIONS
When the camera is aimed at a bright light, such as a
spotlight, or a surface that reflects bright light, smear or
blooming may appear. To avoid smear and blooming
the camera should be operated carefully in the vicinity
of extremely bright objects.
PREVENTION OF BLOOMING AND SMEAR
Bright object
Smear
Blooming