Panasonic AJ-D700P - Manual (Page 106)

Setting Menu Screens
SET UP CARD Screen
This page sets the loading, saving and formatting operations for setup cards. Align the “–” with the desired item and press the
UP or DOWN button to perform the corresponding processing.
– SET UP CARD –
READ ( CAM)
WRITE ( CARD)
CARD CONFIG.
ID READ/WRITE :ON
FUNCTION1~2R/W:ON
L/M/H SET R/W :ON
LEVEL 1~6 R/W :ON
Item
READ( CAM)
WRITE
( CARD)
CARD CONFIG.
ID READ/WRITE
FUNC1~2 R/W
L/M/H SET R/W
LEVEL1~6 R/W
Variable
range
ON
OFF
VF
display
USER
ENG
USER
ENG
USER
ENG
USER
ENG
ON USER
OFF ENG
ON
OFF USER
ENG
ON
OFF USER
ENG
Remarks
Setup card data is written to the unit.
Camera data is written to the setup
card.
The setup card is formatted.
CAMERA ID READ/WRITE is switched
ON or OFF when data is read from or
written on the set-up card.
ON:
Read/write is enabled.
OFF: Read/write is disabled.
READ/WRITE for FUNCTION1 and
FUNCTION2 is switched ON or OFF
when data is read from or written on the
set-up card.
ON:
Read/write is enabled.
OFF: Read/write is disabled.
READ/WRITE for LOW SETTING, MID
SETTING and HIGH SETTING is
switched ON or OFF when data is read
from or written on the set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.
READ/WRITE for LEVEL 1/6,2/6,3/6,
4/6, 5/6 and 6/6 is switched ON or OFF
when data is read from or written on the
set-up card.
ON:
Read/write is enabled.
OFF: Read/write is disabled.
*For example, so as not to change the CAMERA ID when reading from, or writing to the SET UP CARD, the ID READ/WRITE
should be selected to OFF.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu:
Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the
ENG menu.
- 1 0 6 -