Panasonic AJ-D700P - Manual (Page 41)

Mounting a Wireless Microphone
When using the Panasonic wireless microphone system, mount the WX-RA700 wireless receiver.
To the AUDIO OUT Connector
WX-RA700
Wireless Receiver
WX-R980
Camera Attachment
XLR Cable
AUDIO IN switch:
Set the AUDIO IN switch of
the channel to which the
audio signal source is
connected to REAR [LINE].
Connect to the AUDIO IN CH1
or CH2 Connector.
When detaching the
wireless microphone,
press up the lever on the
bottom of the camera
attachment (1) and detach
the microphone in the
upward direction (2).
(2)
Lever
AJ-D700 Main Unit
(1)
See the Handling Instructions for the WX-RA700 wireless receiver for wireless receiver opera-
tions.
Connecting an Audio Component
When using an audio component as the line input signal source, connect the audio component to
the unit’s AUDIO IN CH1/CH2 connectors.
Audio Equipment
AUDIO IN Switch:
Set the AUDIO IN Switch of
the channel to which the
audio signal source is
connected to REAR [LINE].
Connect to the AUDIO IN
CH1/CH2 Connectors.
- 4 1 -