Panasonic AJ-D700P - Manual (Page 98)

Recording With an External VTR Instead of the Internal VTR
Using the 26-pin Output Adaptor
Connections
The method of connecting the external VTR is the same as that described in “Recording Simulta-
neously with the Internal VTR and an External VTR”.
See “Connections” on page 95.
Mounting the 26-pin output adaptor
Consult your local dealer when mounting the adaptor.
1
Set the unit’s internal switches.
1 Remove the side panel on the display window side.
2 Remove the Printed Circuit Board holder and remove the CAMERA ENC Printed Circuit
Board.
3 Set SW101 and SW102 to the 26P side.
CAM ENC Printed Circuit Board
Printed Circuit
Board Holder
CAM ENC Printed Circuit Board
2
Mount the 26-pin output adaptor.
- 98 -