Panasonic AJ-D700P - Manual (Page 134)

Specifications
VTR Section
VTR Video System (during playback on a standard playback unit)
Bands: Brightness; 30 Hz to 5.75 MHz +1.0 dB/–3.0 dB
S/N ratio: 55 dB
K factor (2T pulse): Within 2%
Y/C delay: Within 20 ns
VTR Audio System (during playback on a standard playback unit)
Sampling frequency: 48 kHz (synchronized to video)
Quantization: 16-bits/sample
Frequency response: 20 Hz to 20 kHz±1.0 dB (at reference level)
Dynamic range: 85 dB or more (at 1 kHz, AWTD)
Distortion: Within 0.1% (at 1 kHz, operating level)
Wow/flutter: Below measurable limit
Head room: 20 dB
Emphasis: Ti = 50 , T2 = 15 (can be turned ON/OFF)
VTR Tape Running System
Tape speed:
Recording/playback time:
FF/REW time:
33.820 mm/s
Approx. 63 min. (using the AJ-P63MP)
Approx. 3 min. (using the AJ-P63MP)
Connectors
Input
AUDIO IN CH1/CH2
(XLR, 3-pin, female):
MIC IN (XLR, 3-pin, female):
GENLOCK IN (BNC):
TIME CODE IN (12-pin):
MIC/LINE switchable
MIC; Menu setting to –60/–50/–40 dBu
LINE; Menu setting to –6/0/+4 dBu
Menu setting to –60/–50/–40 dBu, balanced 3 kohm
1.0 Vp-p, 75 ohm
0.5 to 18 Vp-p
output
CAMERA OUT (BNC):
VIDEO OUT (BNC):
AUDIO OUT
(XLR, 3-pin, male):
1.0 Vp-p, 75 ohm
1.0 Vp-p, 75 ohm
+4 dBu, balanced, low-impedance
(Menu setting to CH1/CH2/MIX)
AUDIO CH1/CH2 OUT
(12-pin, TC IN/OUT
combined):
VTR (26-pin, option):
TIME CODE OUT (12-pin):
PHONES (mini-jack×2):
–20 dBu, unbalanced, low-impedance
1.0 Vp-p
Other
DC IN (XLR, 4-pin, male):
DC OUT (4-pin):
LENS (12-pin):
REMOTE (ECU, 6-pin):
DC 11 to 17 V
DC 11 to 17 V, maximum rated current; 0.1 A
Accessories
Shoulder belt (1)
Sony battery connector, NP-1 screw
Video input connector (1)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
- 1 3 4 -