Panasonic DX-2000 - Manual (Page 197)

195
Verification Stamp
The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be
replaced or refilled with ink.
To remove the stamp:
(see Note 1) (see Note 2)
1 Open the ADF Door.
2 (1) Remove by pulling the Stamp Assembly
upward.
(2) Remove the Stamp. Replace the stamp
with a new one or refill the stamp with a few
drops of the specified ink into the back of
the stamp.
1. Please contact your local Panasonic dealer to purchase a new stamp. See page 204 for order number.
2. Stamp ink refills can be purchased from a stationary store. Use blue Shachihata X Stamp ink (No. 22113) or its
equivalent.
ADF Door
1
2
Note:
Troubleshooting
8