Panasonic DX-2000 - Manual (Page 80)

78
Document Guides
CORRECT INCORRECT
How to Load Documents
6. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
7. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge placed
into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up to 50
PAGES on the ADF at one time. If you have more than 50 pages, wait until transmission or storing in memory
starts as pages feed through, place any remaining pages on top of the last page in the feeder.
8. Adjust the Document Guides to center the document on the ADF.
When you set a document on the ADF, the display message will change from date and time (standby) to the
following message. You can now change basic transmission settings, or begin the dialing procedure.
(see Note 1)
(see Note 2)
1. Transmitting documents longer than 14" (356 mm) requires user’s assistance.
2. When transmitting documents longer than Letter size (8.5"
×
11"), please extend the sub-tray as shown below.
ENTER STATION(S)
THEN PRESS START 00%
Sub - Tray
Loading Documents
Note: