Panasonic DX-2000 - Manual (Page 47)

45
Setting the Internet Relay Station
To use the Internet Relayed Transmission, you must first store the following parameters into your machine.
(see Note 1) (see Note 2) (see Note 3)
1
2
3
repeatedly until display shows:
4 Enter the Relayed Transmission Password using the
Character keys (up to 10 characters).
Ex:
5
Enter the Manager’s Email Address using the Character keys
(up to 60 characters).
Ex:
6
7
You can now set additional Domain Names by repeating
the procedures from Steps 8 to 9, or return to standby by
pressing .
1. Use or to move the cursor beyond the incorrect character, press then re-enter the new character .
2. You can search for the User Parameters by pressing or .
3. Register up to ten Domain Names that are authorized to use your DX-2000 for Relayed XMT Requests. (If the
Domain Name fields are left blank, anyone can access your machine for Relayed XMT)
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
∨ ∧
1
1:USER PARAMETERS?
PRESS SET TO SELECT
SET RELAY XMT PASSWORD
❚
n e w y o k r
RELAY XMT PASSWORD
newyork ❚
SET
m g r 27 @
p a n a s o n i c
28 . c o m
MANAGERS EMAIL ADDR
❚
MANAGERS EMAIL ADDR
[email protected] ❚
SET DOMAIN NAME (01)
❚
SET
STOP
DOMAIN NAME (02)
❚
CLEAR
2
Note:
Setting the Internet Parameters