Panasonic DX-2000 - Manual (Page 56)

54
Using a PC to Update the Auto Dialer Remotely
This feature provides a convenient and an easy way to Update, Backup or Restore the One-Touch and
Abbreviated dialing numbers right from your PC by sending a text email message to the DX-2000.
The DX-2000 interprets the command that you enter in the "Subject" line of your email message and performs
one of the following functions, it Retrieves or Stores data into the Auto Dialer (One-Touch and/or ABBR No.).
The two types of commands that can be entered in the "Subject" line of your email:
1) To Store data, type :#set abbr(password)# : where the password is the Remote Password programmed in
the DX-2000’s User Parameters (i.e. 123456789). You can
program any known unused Auto Dialer location(s) with this
command for the first time, without having to Retrieve the One-
Touch / ABBR No. data first. If the desired Auto Dialer location
already contains data, the DX-2000 will overwrite the existing
data, therefore, we recommend that you use the Retrieve
command below instead, to edit existing Auto Dialer locations,
refer to pages 58 to 60.
2) To Retrieve data, type :#get abbr(123456789)#
(see Note 1)
1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "2:Valid".
(See page 76.)
Note:
Programming or Retrieving Parameters via Email