Panasonic KX-FC225NZ - Manual (Page 16)

2. Preparation
16
2 Preparation Connections and Setup
2.1 Connections
Important:
L The unit will not function when there is a power
failure. To make calls in emergency situations,
you should connect a telephone that can
function during a power failure to the telephone
line.
2.1.1 Base unit
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L Be sure to use the telephone line cord included in
this unit.
L Do not extend the telephone line cord.
L This unit is not designed to be used with rotary
(pulse dialling) services.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L If you use the unit with a computer and your internet
provider instructs you to install a filter, please
connect the telephone line cord as follows (page 64,
65).
1 Telephone line cord
L Connect to a single telephone line jack.
2 Power cord
L Connect to a power outlet (220 V – 240 V, 50/60
Hz).
(For Australian
users)
(For New
Zealand users)
2
1
Telephone
line cord
Noise filter
(For ADSL users)
FC225-226AL-PFQX2518ZA-en.book Page 16 Friday, June 23, 2006 4:08 PM