Panasonic KX-FC225NZ - Manual (Page 52)

9. Programmable Features
52
Cordless Handset
9.2 Cordless handset programming
9.2.1 Cordless handset features
1. {j/OK}
2. Press {^} or {V} to select “ Handset Setup”. i
{>}
3. Press {^} or {V} to select the desired item in the
cordless handset settings menu. i {>}
4. Press {^} or {V} to select the desired item in the
sub-menu. i {>}
5. Press {^} or {V} to select the desired setting then
press {>} or follow the instruction in the rightmost
column of the chart.
L To exit the operation, press {ih}.
Cordless handset
settings menu Sub-menu Feature (default setting)
“ Time Settings” “ Set Date & Time” *1
Date and time: page 19
“ Alarm” Set the alarm: page 54
“ Ringer Setup” “ Ringer Volume” *2
Cordless handset ringer volume (Maximum): page 18
“ Ext. Ringtone” *2 Ringtones for outside calls (“ Ringtone 1”) *3
“ Int. Ringtone” Ringtones for intercom calls (“ Ringtone 3”) *4
“ Display Setup” “ Standby Display” Standby mode display (“ Off”) *5
“ Select Language” LCD display language (“ English”): page 54
“ Contrast” *2 Display contrast (Level 3)
“ Registration” “ Register H.set” page 55
“ Other Options” “ New Msg. Alert” New message alert (“ Off”) *6
“ Keytones” Keytones ON/OFF (“ On”)
“ Auto Talk” Auto talk ON/OFF (“ Off”) *7
*1 When this setting is changed using the cordless handset, the setting for the base unit will also be changed, and
vice versa.
*2 This setting can be changed individually for the base unit and the cordless handset.
– To set the base unit ringer volume, see page 18.
– To set the base unit ringtone for outside calls, see feature #17 on page 47.
– To set the base unit LCD display contrast, see feature #39 on page 49.
*3 If you select one of the melody ringtones, the ringtone will continue to sound for several seconds if the caller
hangs up before you answer. You may hear a dial tone or no one on the line when you answer a call.
The preset melodies in this product are used with permission of © 2004 M-ZoNE Co., Ltd.
*4 The preset melodies in this product are used with permission of © 2004 M-ZoNE Co., Ltd.
*5 If “
Off” is selected, only current date and time are displayed.
If “ Handset Number” is selected and the current cordless handset number is 2, “[2]” is displayed.
*6 This feature alerts you when new messages have been recorded:
– Telephone answering machine (page 43)
The message indicator on the cordless handset flashes until you have listened to all new messages.
While message alert is ON, battery operating time is shortened (page 17).
*7 Auto talk feature allows you to answer calls simply by lifting the cordless handset OFF the base unit. You do not
need to press {C}.
{^}{V}{>} {ih}
{j /OK}
FC225-226AL-PFQX2518ZA-en.book Page 52 Friday, June 23, 2006 4:08 PM