Panasonic KX-FC225NZ - Manual (Page 51)

9. Programmable Features
51
Setting recall/flash time
(for the base unit and
cordless handset)
*3
{#}{ 7}{2} The recall/flash time depends on your telephone exchange or
host PBX.
{
1} “ 900msec.”
{ 2} “ 700msec.”
{ 3} “ 600msec.”
{ 4} “ 400msec.”
{ 5} “ 300msec.”
{ 6} “ 250msec.”
{ 7} “ 200msec.”
{ 8} “ 160msec.”
{ 9} “ 110msec.”
{*} “ 100msec.” (default)
{ 0} “ 90msec.”
{#} “ 80msec.”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Setting the connecting
tone {#}{ 7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting {#}{ 7}{7} { 1} “ TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 36)
{
2} “ FAX ONLY”: Fax only mode (page 36)
Resetting advanced
features to their default
settings {#}{ 8}{0} { 0} “ NO” (default)
{ 1} “ YES”
To reset the advanced features:
1. {MENU} i {#}{8}{0}
2. Press {1} to select “ YES”. i {SET} i {SET}
Note:
L The ECM selection (feature #68 on page 50) will not be reset.
*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and
vice versa.
*2 This setting can be changed individually for the base unit and the cordless handset.
– To change the cordless handset LCD display contrast, see page 52.
*3 For KX-FC225NZ, the default setting is “ 600msec.”.
Feature Feature code Selection
FC225-226AL-PFQX2518ZA-en.book Page 51 Friday, June 23, 2006 4:08 PM