Panasonic KX-FC225NZ - Manual (Page 35)

5. Fax
35
L The {AUTO ANSWER} indicator on the base unit
turns OFF and r disappears from the cordless
handset display.
Activating TEL mode with the cordless handset
1. {j/OK} i “ Answer System” i {>}
2. “ Answer Off” i {>} i {ih}
How to receive phone calls and faxes with the base
unit
1. Press {SP-PHONE} to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX START}.
How to receive calls and faxes with the cordless
handset
1. Lift the cordless handset and press {C} or {s} to
answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {j/OK}.
3. “ Fax Start” i {>}
L You can also press {FAX START} on the base
unit.
4. Press {ih} or place the handset on the base unit.
How to receive faxes with an extension telephone
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*}{#}{9} (default fax activation code)
firmly.
3. Replace the handset.
Note:
L To receive fax documents using the extension
telephone, you must set the remote fax activation to
ON (feature #41 on page 49) beforehand. The
default setting is ON.
To stop receiving
Press {STOP}.
{ FAX START}
{ SP-PHONE} { STOP}
AUTO ANSWER
{>} {ih}
{s}
{C}
{j /OK}
FC225-226AL-PFQX2518ZA-en.book Page 35 Friday, June 23, 2006 4:08 PM