Panasonic KX-FC225NZ User Manual
Page 69
12. Help
69
12.3.8 SMS (KX-FC225AL only)
12.3.9 If a power failure occurs
L
The unit will not function.
L
The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L
Fax transmission and reception will be interrupted.
L
If delayed transmission (feature #25 on page 48) is programmed and a power failure prevents the document from
being sent at the set time, the document will be sent after power is restored.
L
If any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will
be printed stating which documents in memory have been erased.
Problem
Cause & Solution
I cannot send or receive SMS
messages.
L
You have not subscribed to the appropriate service. Consult your service
provider.
L
The SMS message centre number(s) are not stored or are incorrect. Store
the correct numbers (page
28).
L
You may request that your service provider block your phone number when
making phone calls. In order to send messages, you need to add “1832” to
the beginning of the Message Centre 1 number (page
28). Note that by
doing so, your phone number will be sent along with your SMS messages.
L
Message transmission was interrupted. Wait until the message has been
sent before using other telephone functions.
L
Your unit is connected to a telephone line with ADSL service. We
recommend connecting a filter (contact your ADSL service provider) to the
telephone line between the base unit and the telephone line socket.
“
FD” is displayed. L The unit could not connect to the SMS message centre. Confirm that the
correct SMS message centre numbers are stored (page
28). Confirm that
SMS is turned ON (page
28).
“
FE” is displayed.
L
An error occurred while sending the message. Try again.
“
E0” is displayed.
L
Your telephone number is permanently withheld or you have not subscribed
to the appropriate service. Consult your service provider.
“Q” is not displayed after you
display a message. An error
code is displayed.
L
When an error code (“
FD”, “FE”, or “E0”) is displayed, “Q” will not be
displayed even if you have displayed the message.
Note for Australian users:
L
Panasonic Australia operates a toll free Customer Care Centre. Please visit the website for assistance at
<http://www.panasonic.com.au> or please call 132600.
Note for New Zealand users:
L
Panasonic New Zealand operates a Customer Support Centre. Please call (09) 2720178 for assistance.
FC225-226AL-PFQX2518ZA-en.book Page 69 Friday, June 23, 2006 4:08 PM