Panasonic KX-FC225NZ - Manual (Page 29)

4. SMS (KX-FC225AL only)
29
characters you can send or receive may be limited by
your SMS service provider/telephone company.
Consult your SMS service provider/telephone
company for details.
L If your message contains over 160 characters, the
message is a long message and “@@
Long
Message@@” is displayed. Your service
provider/telephone company may treat long
messages differently from other messages. Consult
your service provider/telephone company for details.
L If your phone is connected to a PBX, store the PBX
line access number (page 30).
4.4.2 Sending a saved message
1 {j /OK} i “ SMS” i {>}
2 To access the public mailbox
“
Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
3 “ Send List” i {>}
4 To read a saved message, press {^} or {V} to select
the message. i {j/OK}
5 To send the message, press {j/OK}. i “ Send”
i {>}
6 Press and hold {C/T} to erase all numbers, then
continue from step 5, “4.4.1 Writing and sending a
new message”, page 28.
4.4.3 Editing and sending a saved
message
1 {j /OK} i “ SMS” i {>}
2 To access the public mailbox
“
Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
3 “ Send List” i {>}
4 Press {^} or {V} to select the message. i
{j
/OK}
5 {j /OK} i “ Edit Message” i {>} i
Continue from step 4, “4.4.1 Writing and sending a
new message”, page 28.
4.4.4 Erasing saved messages
1
{j /OK} i “ SMS” i {>}
2 To access the public mailbox
“
Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
3 “ Send List” i {>}
4 Press {^} or {V} to select the message. i
{j
/OK}
5 {j /OK} i “ Erase” i {>}
L To erase all messages in the selected mailbox,
select “
Erase All”. i {>}
6 “ Yes” i {>} i {ih}
4.5 Receiving a message
When an SMS message is received:
–
a tone is heard (if the handset ringer is turned on)
– “ Receiving SMS Message” is displayed
– F is displayed
– the message indicator on the handset flashes if the
message alert feature (page 52) has been turned on
4.5.1 Reading a received message
1
{j /OK} i “ SMS” i {>}
2 To access the public mailbox
“
Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
L If a mailbox contains new (unread) SMS
messages, “@” is displayed next to the total
number of messages for that mailbox.
3 “ Receive List” i {>}
4 Press {^} or {V} to select a message.
L Messages which have already been read are
indicated by a “Q”, even if they were read using
another handset.
5 Press {j/OK} to read the message content.
Note:
L To call the message sender, press {C} or {s}.
4.5.2 Replying to a message
1 While reading a received message, press {j/OK}.
2 “ Reply” i {>}
3 Enter a message (page 58). i {j/OK}
4 Edit the destination phone number and/or press
{j
/OK}.
5 Continue from step 6, “4.4.1 Writing and sending a
new message”, page 28.
Editing/forwarding a message
1. While reading a received message, press {j/OK}.
2. “ Edit Message” i {>}
3. Continue from step 4, “4.4.1 Writing and sending a
new message”, page 28.
4.5.3 Erasing received messages
1 While reading a received message, press {j/OK}.
FC225-226AL-PFQX2518ZA-en.book Page 29 Friday, June 23, 2006 4:08 PM