Precor 5.31 - Manual (Page 53)

Owner’s Manual: Advanced Programming and Troubleshooting 51
Informational Displays
The EFX provides information about its use (odometer and
hour meter), as well as software version, usage log, and error
codes. In general, you would only access this information if
directed to do so by Precor Customer Support.
These instructions guide you through all eight informational
displays. Pressing the OK key moves you through the
displays. Pressing the navigational arrow keys cycles you
through the menu selection. To exit, press RESET at any
time.
Viewing the Odometer
1. At the Precor banner, press the following keys in
sequence and without pause:
RESET, 6, 5
The numbers 6, 5 appear on the display as you press the
associated key.
Then DIAGS - INFORMATION DISPLAY scrolls across
the display followed by ODOMETER.
2. Press OK to view the odometer value (cumulative strides
traveled) or press the ▼ arrow key to move to the next
informational display.
3. When you are ready, press OK to move to the next
display (hour meter).