Polycom 560 User Manual
Page 25
Advertising
Customizing Your SoundPoint IP® 560 Phone
2 - 5
• There is an incoming call (ringing)
• There is an outgoing call (ringing back)
• Any menu shows on the display
In all other cases, the mode changes to Backlight Idle.
To modify the backlight intensity:
1.
Press .
2.
Select Settings > Basic > Backlight Intensity.
3.
Select Backlight On Intensity.
4.
Use the
or
to select high, medium, low, or off and press the
Select soft key to modify the Backlight On Intensity.
The default level is medium.
5.
Select Backlight Idle Intensity.
6.
Use the
or
to select high, medium, low, or off and press the
Select soft key to modify the Backlight On Intensity.
The default level is low.
Advertising