Polycom 560 - Manual (Page 26)

User Guide SoundPoint IP 560 Phone
2 - 6
7. Select Maximum Intensity.
8. Press the Up or Down soft keys to increase or decrease the backlight
intensity.
9. Press the Ok or Cancel soft keys to accept or cancel changes.
10. Press or the Exit soft key repeatedly to return to the idle
display.
Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset > Headset Memory.
3. Use the or to select Enabled and press the Select soft key to
enable Headset Memory Mode.
4. Press or the Exit soft key repeatedly to return to the idle
display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.