Polycom 560 User Manual
Page 47
Using the Basic Features of Your SoundPoint IP® 560 Phone
3 - 3
To place a call using the handset:
1.
Do the following steps in any order:
— Pick up the handset.
— Dial the desired number using the dial pad.
To place a call using Hands-Free Speakerphone mode:
1.
Do one of the following steps:
a
With the handset on-hook, press
,
, or the
NewCall soft key to obtain dial tone.
Dial the desired number using the dial pad.
b
With the handset on-hook, dial the desired number using the dial pad.
Press ,
,
or
the
Dial soft key.
To place a call using the headset:
1.
Do one of the following steps:
Note
You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press followed by followed by Status > Platform > Phone. The IP address is
listed together with other phone information. For example, 10.3.0.42, sip:
[email protected].
Press the Name soft key and enter the URL or IP address. Use * for “.” and # for
“@”. Then press the Send soft key to complete the call.
Support for SIP URL or IP address calling may be disabled. Contact your system
administrator.
Note
If “Handsfree mode disabled” appears on the graphic display after you press the
speakerphone key
,
your system administrator has disabled the speakerphone on
your phone.