Panasonic PT-EW630U - Manual (Page 77)

Network
ENGLISH -
77
Settings
Description of each item
J
1 Page selection tabs
Click these to switch pages.
2 Monitor information button
Click this item, and the status of the projector
is displayed.
3 Projector control button
Click this item to display the projector control
page.
4 Detailed set up button
Click this item to display the advanced
settings page.
5 Change password button
Click this button to display the password
change page.
6 Crestron RoomView button
Click this button to monitor and control the
projector through the network.
7 Language switch button
Click this button to switch language between
English and Japanese.
Projector status page
J
Click [Status], then [Projector status] to display the Status information page.
This page displays the projector statuses established for the items shown below.
1 Displays the type of projector.
2 Displays the firmware version of the projector
main unit.
3 Displays the power source status.
4 Displays the video mode status.
5 Displays the serial number of the projector.
6 Displays the firmware version of the network.
7 Displays the AV mute status.
8 Displays the volume status.
9 Displays the status of input switch.
10 Displays the intake temperature status of the
projector.
11 Displays the the around lamp temperature
status of the projector.
12 Displays the optics module temperature
status of the projector.
13 Displays the use time of the lamp.
14 Displays the self diagnostics information.
( Æ page 78 )
15 Displays the runtime of the projector.
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
14
13
7
15