Network, English, E-mail set up page (continued) – Panasonic PT-EW630U User Manual
Page 84: Authentication set up page
Network
84
- ENGLISH
Settings
E-mail set up page (continued)
J
1 Enter the E-mail Address2 of your desired recipient.
2 Select the conditions for sending e-mail.
MAIL CONTENTS:
Select [NORMAL] or [SIMPLE].
ERROR:
An error is detected by self-diagnosis.
LAMP RUNTIME:
Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.
Authentication set up page
J
The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions.
Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page.
1 Select the authentication method specified by
your Internet service provider.
2 Set this if SMTP authentication has been
selected.
3 POP server name field
Available input characters:
Alphanumeric characters (A - Z, a - z, 0 - 9),
hyphen (-), period (.)
4 POP/SMTP server user name field
5 POP/SMTP server password field
6 Enter the port number for the SMTP server
(normally “25”).
7 Enter the port number for the POP server
(normally “110”).
8 Button to update settings
2
1
1
2
3
4
5
6
7
8