Panasonic PT-EW630U - Manual (Page 42)

42
- ENGLISH
Basic Operation
Basic operations by using the remote control
Using the SHUTTER/ AV
MUTE button
* <SHUTTER> button (Only for EZ570 series, EW630
series and EX600 series)
This function allows you allows you to completely
block out light to the screen.
button
*
Press the <SHUTTER> button on the
remote control.
Note
For details, see “Setting” of Main menu. ( z Æ page 69)
* <AV MUTE> button (Only for EW530 series and
EX500 series)
モヷチヮヶヵユ
button
*
Press the <AV MUTE> button on the
remote control.
Press the < AV MUTE> button on the remote control
to black out the image. To restore to normal, press the
< AV MUTE> button again or press any button.
Note
When use the <MUTE> button to release the [ z AV mute]
function, the mute function cannot be operated at the
same time.
Switching the input signal
You can switch the input signals to project.
buttons
Press the <INPUT> button or the <INPUT
1>/<INPUT 2>/<INPUT 3> button on the
remote control.
The input source changes each time you press the
<INPUT> button as follows:
Input 1 --> Input 2 --> Input 3 --> ...
The input source changes each time you press the
<INPUT 1>/<INPUT 2>/<INPUT 3> button as follows:
Note
Whether the input search function is available or not z
after you pressed the <INPUT> button, it depends on the
setting of the [Input button] in the Setting menu.
( Æ page 63)
black out projected image
INPUT 1 button
Input 1
RGB(PC analog)
RGB (Scart)
HDMI
DVI-D(HDCP)
DVI-D
INPUT 2 button
Input 2
Video
Y,Pb/Cb,Pr/Cr
RGB
INPUT 3 button
Input 3
Video
Y,Pb/Cb,Pr/Cr
S-video