Panasonic PT-EW630U - Manual (Page 54)

Manual PC adjust
54
- ENGLISH
Settings
Current mode
Press ▲▼ to select [Current mode]. 1 )
Press ► or the <ENTER> button to 2 )
enter the next submenu to show
[ H-sync freq.] and [V-sync freq.] of the
connected computer.
Clamp
Press ▲▼ to select [Clamp]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the clamp level.
3 )
When the image has dark bars, try this z
adjustment.
Display area H
Press ▲▼ to select [Display area H]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the horizontal area
3 )
displayed by this projector.
Display area V
Press ▲▼ to select [Display area V]. 1 )
Press the <ENTER> button to display 2 )
the dialog box.
Press ◄► to adjust the vertical area
3 )
displayed by this projector.
Reset
To reset the adjusted data, all adjustments will return
to their previous figures.
Press ▲▼ to select [Reset]. 1 )
Press the <ENTER> button. 2 )
A confirmation box appears and then select [Yes]. z
Mode free
Press ▲▼ to select [Mode free]. 1 )
Press ► or the <ENTER> button to 2 )
enter the next submenu.
Move the highlight to the mode that you want z
to clear and then press the <ENTER> button. A
confirmation box appears and then select [Yes].
Store
Press ▲▼ to select [Store]. 1 )
Press ► or the <ENTER> button to 2 )
enter the next submenu.
Move the highlight to one of the Modes 1 to 10 z
in which you want to store, and then press the
<ENTER> button. A confirmation box appears
and then select [Yes].