Panasonic PT-EW630U - Manual (Page 56)

56
- ENGLISH
Settings
Select [Image adjust] from the Main Menu (see
“Navigating through the menu” on page 47),
then select the item from the sub-menu.
Remote Control Side Control
Note
Make sure you selected [Store] after adjusting settings. z
Some settings can not be stored if not registered with
[Store] function.
Contrast
Press ▲▼ to select [Contrast]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►. increase the contrast Maximum
value 63
Press ◄.
decrease the
contrast
Minimum
value 0
Brightness
Press ▲▼ to select [Brightness]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►.
increase the
brightness
Maximum
value 63
Press ◄.
decrease the
brightness
Minimum
value 0
Color
Press ▲▼ to select [Color]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►.
increase the
intensity of the color
Maximum
value 63
Press ◄.
decrease the
intensity of the color
Minimum
value 0
Note
When input video signal to the projector, [Color] will be z
available.
Tint
Press ▲▼ to select [Tint]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the tint value to
3 )
get a proper color balance.
Adjustments can be made between z 0 and 63.
Note
When you select [NTSC] or [NTSC4.43] in System menu z
under Video input signal, [Tint] will be available.
Iris
This iris function effectively increase the contrast
intensity.
Press ▲▼ to select [Iris 1 ) * ].
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to select the desired items.
3 )
Off Disabled
On
Contrast is prioritized over
brightness.
* It is only for EZ570 series, EW630 series and EX600
series.
Image adjust