Panasonic PT-EW630U - Manual (Page 57)

Image adjust
ENGLISH -
57
Settings
Color temp.
Press ▲▼ to select [Color temp.]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to select the desired Color
3 )
temp. level.
You can select the desired [Color temp.] from z
[XLow], [Low], [Mid] or [High].
Red
Press ▲▼ to select [Red]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►. deepen red tone Maximum
value 63
Press ◄. lighten red tone
Minimum
value 0
Green
Press ▲▼ to select [Green]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►.
deepen green
tone
Maximum
value 63
Press ◄.
lighten green
tone
Minimum
value 0
Blue
Press ▲▼ to select [Blue]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►. deepen blue tone Maximum
value 63
Press ◄. lighten blue tone Minimum
value 0
Offset
Press ▲▼ to select [Offset]. 1 )
Press ► or the <ENTER> button to 2 )
access the submenu.
Press ▲▼ to select the desired item
3 )
and then press the <ENTER> button.
Press ◄► to adjust the setting value.
4 )
Operation Adjustment
Adjustment
range
Press ►.
deepen red/green/
blue tone of the
black level of an
image
Maximum
value 63
Press ◄.
lighten red/green/
blue tone of the
black level of an
image
Minimum
value 0
Daylight View
This function uses an ambient light sensor to detect
the room’s light intensity and adjust the projector
output automatically to ensure a bright presentation.
Press ▲▼ to select [Daylight View]. 1 )
Press the <ENTER> button to display 2 )
the adjustment dialog box.
Press ◄► to switch between [Auto],
3 )
[On] and [Off].
Note
When [Rear] is set to [On], [Auto] is disabled. z
When this function is set to [On] or [Auto], the z
[Sharpness] is disabled.