Panasonic PT-EW630U - Manual (Page 64)

Setting
64
- ENGLISH
Settings
Display
This function decides whether to display On-Screen
Displays.
Press ▲▼ to select [Display]. 1 )
Press the <ENTER> button. 2 )
Press ▲▼ to switch 3 ) between each
option as below.
On Show all the On-Screen
displays * 1
Countdown
off
Show the input image instead
of the countdown when turning
on the projector * 2
Off Hide the On-Screen Displays * 3
Use this function when you want to project *1 :
images after the lamp becomes bright enough.
The factory default setting is in this option.
Use this function when you want to project the *2 :
image as early as possible even when the lamp
is not bright enough.
Hide the On-Screen Displays except; *3 :
● On-Screen Menu.
● [Power off?]
● [P-timer] display.
● No signal for [Power management]
● [Please wait ...]
● [Picture in Picture]
● [Simple mode]
● [Video delay control]
● Arrows for the [True] function in the Screen
Menu.
● [Iris] function is disabled.
Background
Select the background screen for when no input signal
is detected.
Press ▲▼ to select [Background]. 1 )
Press the <ENTER> button. 2 )
Press ▲▼ to switch 3 ) between each
option as below.
Blue Blue colored background.
User The logo transferred by "Logo
Transfer Software * 1 " is projected.
Black Black colored background.
" Logo Transfer Software" is included on the *1 :
supplied CD-ROM.
Logo
This function allows you to customize the screen logo
with [Logo select], [Logo PIN code lock] and [Logo
PIN code change] functions.
Press ▲▼ to select [Logo]. 1 )
Press ► or the <ENTER> button. 2 )
Press ▲▼ to choose the desired item. 3 )
Logo select
J
This function decides on the starting-up display from
among following options.
Off Show the countdown display only.
Default Show the factory-set logo.
User The logo transferred by "Logo
Transfer Software * 1 " is projected.
" Logo Transfer Software" is included on the *1 :
supplied CD-ROM.
Logo PIN code lock
J
This function prevents an unauthorized person from
changing the screen logo.
Off The screen logo can be changed freely
from the Logo Menu.
On The screen logo cannot be changed
without a Logo PIN code.
Note
If you want to change the Logo PIN code lock setting, z
press the <ENTER> button and the Logo PIN code
dialog box appears. Enter a Logo PIN code by following
the steps below. The initial Logo PIN code is set to “4321”
at the factory.
Logo PIN code change
J
Logo PIN code can be changed to your desired four-
digit number.
Press ▲▼ to select [Logo PIN code 1 )
change] and press the <ENTER>
button.
Current logo PIN code dialog box appears. z
Press ▲▼ to enter the current code, 2 )
press the ► button to fix the number
and move the red frame pointer to the
next box.
The New Logo PIN code input dialog box z
appears.
Repeat this step to set the new Logo 3 )
PIN code.