Panasonic CQ-C7105U - Manual (Page 30)

30
Display Setting
Adjustment to display on the DISPLAY menu
CQ-C7205U/C7105U
DISPLA
Y Menu Display
1
Press [MENU] to display the menu
display.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
Turn [VOL] to select a function to be
adjusted.
For using the remote
control, use [}] or
[{].
4
Press [PUSH
SEL] to adjust.
For using the remote control, use [BAND] (SET).
5
Adjust the setting value.
6
Press [PUSH SEL].
For using the remote control, use [BAND] (SET).
7
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
DEMONSTRATION
Switching by [PUSH SEL].
ON: Demonstration screen at no operation
(default)
OFF: Regular screen
GRAPHIC PATTERN
(Default: All)
Turn [VOL] to make a selection.
All: Sequential display from pattern A to C.
Pattern A-C
S.A.:
19-band display (Spectrum analyzer)
STILL IMAGE PATTERN
(Default: All)
Turn [VOL] to make a selection.
All: Sequential display from pattern 1 to 10
No.1-10
CLOCK ADJ
Note: Adjust the clock when “ADJUST” appears on the
display.
[ [ ] : Adjusting minutes
[ ] ] : Adjusting hours
q : Forward
w : Backward
Notes:
¡ The graphic pattern and still image are changeable.
( a page 31)
¡ If corrupted data is selected, “DISPLAY FILE INCOM-
PLETE” appears. ( a page 32)
CONTRAST
(Setting range: 1 to 5, Default: Contrast 3)
q
: Tilting up view angle
w : Tilting down view angle