Panasonic CQ-C7105U - Manual (Page 62)

18 CQ-C7205U/C7105U
1
Press [SOURCE] to select the Sirius
Satellite Radio mode.
2
Press [BAND] to select a band.
Notes:
¡ “– – – –” is displayed when there is no information.
¡ “UPDATING” is displayed when channel informa-
tion is updated.
3
Select a channel.
Channel selection
[]] (TUNE): Preceding channel
[[] (TUNE): Next channel
Note: When you select a locked channel, hold down
[#] on the remote control for 2 sec. or more. PASS-
CODE entering display will appear.
Preset channel selection
[{] (P-SET: Preset): Lower preset channel
[}] (P-SET: Preset): Higher preset channel
Notes:
¡ Direct selection can be executed with [1] to [6]
buttons on remote control.
¡ A preset station is selectable by turning [VOL]
and pressing [PUSH SEL] while the preset list
screen is present on the monitor.
¡ The volume is not adjustable while the preset list
screen is present on the monitor.
Up to 6 channels can be preset in SR1 to SR3
respectively.
Preset channels can be simply called up by pressing
[}] (P-SET) or [{] (P-SET).
Note: Direct selection can be executed with [1] to [6]
buttons on remote control.
1
Tune into a channel.
2
Hold down [}] or [{] for 2 sec. or
more.
3
Turn [VOL] to select a preset number.
4
Hold down [PUSH SEL] for 2 sec. or
more, and the channel is written on the
selected preset number.
Preset number/channel number blinks once.
Notes:
¡ In step 2, a channel can be registered by holding
down the numeric button [1] to [6] for 2 sec. or more.
¡ To stop presetting channels, press [DISP]
(DISPLAY).
¡ The operation above allows users to replace the cur-
rent channel with the channel preset in the selected
number while selecting a preset channel.
Sirius Satellite Radio Receiver (continued)
You can toggle the category on and off every time you
hold down [BAND] for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Channel selection
[]] (TUNE): Preceding channel in current category
[[] (TUNE): Next channel in current category
Category selection
[{] (P-SET: Preset): Preceding category
[}] (P-SET: Preset): Next category
lights when activated.
Channel Preset
(P-SET: PRESET)
Operation Flow
Selection by Categor
y