Panasonic CQ-C7105U - Manual (Page 63)

CQ-C7205U/C7105U 19
English
Sirius Satellite Radio Receiver
Functions Only by
Remote Control Unit
Direct Access
A channel can be directly selected.
Example: channel number 5
1 Press [#] (NUMBER).
2 Press [5].
3 Press [SET].
Note: To suspend direct selection, press [DISP]
(DISPLAY).
TEXT Setting (Sirius Receiver Menu Display)
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Turn [VOL] to select a function to be
adjusted.
For using the remote
control, use [}] or
[{].
3
Press [PUSH
SEL] to determine
the selection.
For using the remote control, use [BAND] (SET).
4
Adjust the setting value.
5
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
Note: [0] - [9] on the remote control shall be used
to enter a channel number and a pass code.
TEXT
Text display
: Enabled (default)
: Disabled
SIRIUS ID
This shows the ID required for having contact with
SIRIUS Satellite Radio.
PARENTAL LOCK
If this function is set to ON, the selected channel is
locked and turns inaudible. If this function is set to OFF,
all channels can be received but UNLOCK/LOCK settings
for each channel can be still saved. (Default: On)
1
Enter the pass code.
2
Press [PUSH SEL] to toggle between
ON and OFF.
LOCK/UNLOCK
Channels to be locked are selectable.
1
Enter the pass code.
2
Press [PUSH SEL].
3
Turn [VOL] to select a channel to be set.
4
Press [PUSH SEL] to toggle between
LOCK and UNLOCK.
PASSCODE
The pass code is changeable. (Default: 1111)
1
Enter the current pass code and press
[PUSH SEL].
2
Enter the new pass code and press
[PUSH SEL].
3
Enter the new pass code and press
[PUSH SEL] again.
Note: When [DISP] is held down for 10 sec. or
more, PASSCODE returns to “1111”.
(PASSCODE BOX)