Panasonic CQ-C7105U - Manual (Page 56)

12 CQ-C7205U/C7105U
iPod Control
Connection of the optional direct cable for iPod (CA-DC300U) allows users to operate the iPod including file selection and file
sequence change with the buttons on this unit.
1
Connect the iPod.
2
Press [SOURCE] to select the iPod
mode. Playback starts.
Note: If playback does not start, press [BAND]
(y / 5).
3
Select a desired portion.
File Selection
[7]: Next file
[6]: Beginning of the current file
For the previous file, press twice.
Note: Hold down for fast forward/reverse.
Pause
Press [BAND] (y / 5).
Press again to cancel.
Current file Time
lights when the direct cable
for iPod (CA-DC300U) is
connected.
*Even when the iPod itself
is not connected, this
indicator will also light.
This indicates that the main
unit normally operates.
Play Mode indicators
lights when each mode is activated.
(iPod 1)
iPod number
The type with which playback data is classified is
selectable.
1
Press [}] (LIST) to call up the play
mode selection screen.
2
Turn [VOL] to select the play mode.
: Playback by playlist
: Playback by artist
: Playback by album
For using the remote control, use [}] or [{].
Note: When the []] button is pressed, the regular
screen appears.
3
Press [PUSH SEL] to determine the
selection.
For using the remote control, use [BAND] (SET).
4
Turn [VOL] to select the portion to play.
Notes:
¡ For selecting ARTIST, the ALBUM selection
screen appears after selecting an artist name.
¡ When the []] button is pressed, the previous
screen appears.
5
Press [PUSH SEL] to determine the
selection.
For using the remote control, use [BAND] (SET).
Note: Files without an album name or an artist
name are not playable in the playing mode of the
album or artist display respectively.
Operation Flow
Playing Mode selection
iPod Mode Display
(iPod 2)
(Random)
(Repeat)
(Album Random)