Nikon HT1000 - Manual (Page 15)

E-15
Connecting Your DVD Player
PC CONTROL RGB IN DVI-D IN
SC TRIGGER
VIDEO IN S-VIDEO IN
S-VIDEO S-VIDEO RGB/DVI RGB/DVI VIDEO VIDEO AUDIO IN AUDIO IN COMPONENT
Y Cb/Pb Cr/Pr
COMPONENT IN
AUDIO OUT
R L
COMPONENT OUT
AUDIO IN
L R
DVD player
You can connect your projector to a DVD player with component output
or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use
the supplied component video cable (RCA ן 3) to connect your DVD
player to the COMPONENT IN connectors on the projector.
For a DVD player without component video (Y,Cb,Cr) output, use com-
mon RCA cables (not provided) to connect a composite VIDEO out-
put of the DVD player to the Video Input of the projector.
Use an audio cable (not supplied) to connect the audio from your
VCR or laser disc player to your audio equipment (if your VCR or
laser disc player has this capability). Be careful to keep your right and
left channel connections correct for stereo sound.
3. Turn on the projector and DVD player.
Component video RCA ן 3 cable
(supplied)
NOTE: Refer to your DVD player's owner's manual for more information about
your DVD player's video output requirements,
Audio cable (not supplied)
Audio Equipment
Audio cable
(supplied)
COMPONENT
AUDIO IN