Nikon HT1000 - Manual (Page 38)

E-38
Masking Unwanted Area (Blanking)
This feature allows you to mask any unwanted area of the screen
image.
Adjust the Top, Bottom, Left or Right blanking with the SELECT ̇ or
̈ button.
Adjusting Position and Clock
This allows you to manually adjust the image horizontally and verti-
cally, and adjust Clock and Phase.
Horizontal/Vertical Position:
Adjusts the image location horizontally and vertically using the SE-
LECT
̇ and ̈ buttons. This adjustment is made automatically when
the Auto Adjust is turned on. See "Auto Adjust" on page E-41 for
turning on or off the Auto Adjust feature.
Clock .............. Use this item to fine tune the computer image or to
remove any vertical banding that might appear. This
function adjusts the clock frequencies that eliminate
the horizontal banding in the image.
Press the SELECT
̇ and ̈ buttons until the band-
ing disappears. This adjustment may be necessary
when you connect your computer for the first time.
This adjustment is made automatically when the Auto
Adjust is turned on.
Phase ............ Use this item to adjust the clock phase or to reduce
video noise, dot interference or cross talk. (This is
evident when part of your image appears to be shim-
mering.) Use the SELECT
̇ and ̈ buttons to adjust
the image.
Use "Phase" only after the "Clock" is complete. This
adjustment is made automatically when the Auto Ad-
just is turned on.
Zoom Position
When “4:3” is selected in Screen Type:
Selecting Resolution
This allows you to activate or deactivate the Advanced AccuBlend
feature.
Auto ............... Turns on the Advanced AccuBlend feature. The pro-
jector automatically reduces or enlarges the current
image to fit the full screen.
Native ............. Turns off the Advanced AccuBlend feature. The pro-
jector displays the current image in its true resolu-
tion.
See "Auto Adjust" on page E-41 for turning on or off
the Auto Adjust feature.
NOTE:
* When "Resolution" is set to "Native", "3D Reform", "Aspect Ratio" and "Screen"
are not available.
* While you are displaying an image with higher resolution than the projector's
native resolution “Native” is not available.
Selecting Overscan Percentage
Select overscan percentage (0%, 5% and 10%) for signal.
NOTE: When "Resolution" is set to "Native", this feature is not available, and
the stored settings and adjustments are invalid.
NOTE: When "Stadium" is selected in "Aspect Ratio", this feature is not avail-
able.
NOTE: The "0%" option may not be available depending upon the input signal.
Selecting Video Filter Level (not available for Video, DVI, Compo-
nent 15kHz and Viewer)
This function reduces video noise.
Off .................. The filter is removed.
Less ............... The low-pass filter is applied partially.
More .............. The low-pass filter is applied fully.
Selecting Noise Reduction Level (not available for RGB, DVI and
Viewer)
Select one of the three levels for reducing video noise: Low, Medium
or High.
NOTE: The lower the Noise Reduction level, the better the image quality by
way of higher video bandwidth.
Selecting Signal Type
Select either the RGB signal type or the Component signal type.
RGB ............... RGB signal
Component .... Component signals such as Y/Cb/Cr, Y/Pb/Pr
NOTE: This feature is available on RGB only. If you do not get a better picture
even when you set "Signal Select" to "Component" in Setup, set this to "Com-
ponent".
Picture Management
This option allows you to adjust neutral tint for yellow, cyan or magenta.
There are 5 factory presets optimized for various types of images, or
you can set 4 user adjustable settings.
Video ............. Recommended for regular picture such as TV pro-
gram
Movie ............. Recommended for movie
Game ............. Recommended for playing a video game
Graphic .......... Recommended for graphics
sRGB ............. Standard color values
User 1-4 ......... User adjustable
When “16:9” is selected in Screen Type:
Move the viewable
area up or down
Move the position of
an image up or down
Zoom or V-Zoom UP DOWN
Cinema UP DOWN
Move the viewable
area up or down
Zoom UP DOWN
Table of Availability for Zoom Position
For PC, DVD Progressive, 480p, 480i, 576p, 576i
Screen Type
4:3
16:9
Aspect Ratio
Normal
Not available
Not available
Full
Not available
Zoom
Available
Available
Cinema
Available
V-Zoom
Available
Stadium
Not available
For 720p, 1080i, 1080p
Screen Type
4:3
16:9
Aspect Ratio
Normal
Available
Not available
Full Zoom
Not available
Cinema
Available
V-Zoom
Not available
Stadium