Nikon HT1000 - Manual (Page 26)

E-26
USING THE VIEWER
Making the Most out of the Viewer Func-
tion
Features
You can view graphic data, capture, and play images on the projector. A
PC card is used to view presentation data prepared on the computer
and to capture and play images projected with the projector.
The Viewer feature allows you to view slides stored on a PC memory
card (referred to as PC card in this manual) on the projector. Even if no
computer is available, presentations can be conducted simply with the
projector. This feature is convenient for holding presentations at meet-
ings and in offices, as well as for playing images taken on digital cam-
eras.
Easy to use
• Viewer can be started immediately simply by inserting a PC card
(not supplied)
• Easy slide switching
• Remote control operation
• Jumping to list of slides or any specific slide
High quality images
• High resolution up to 1024 x 768 dots
• 24-bit full color playback
• Viewing of digital camera images
PC CONTROL
RGB IN
SG TRIGGER
VIDEO IN
S-VIDEO IN S-VIDEO S-VIDEO
RGB/DVI RGB/DVI
VIDEO VIDEO
AUDIO IN AUDIO IN
COMPONENT
Y
Cb/Pb
Cr/Pr
Removing the PC Card
Press the eject button. The PC card pops out a little. Grasp the edges
of the PC card and pull it out.
NOTE: Do not eject the PC card while its data is being accessed.
Eject button
Direction for Inserting the PC Card
The PC card has a top and bottom and must be inserted into the PC
card slot in a specific direction. It cannot be inserted backwards or up-
side-down. Attempting to force it into the slot in the wrong direction may
break the internal pin and damage the card slot. Refer to the PC card's
operating instructions for the proper direction of insertion.
PC Card Type
The PC Card slot accepts PCMCIA Type II only.
Inserting and Removing a PC Card
Inserting the PC Card
• Hold the PC card horizontally and insert it slowly into card slot
with its top facing up.
• The eject button pops out once the PC card is fully inserted.
Check that the PC card is fully inserted.
NOTE: Do not try to force the PC card into the slot.
PC CONTROL
RGB IN
SG TRIGGER
VIDEO IN
S-VIDEO IN S-VIDEO S-VIDEO
RGB/DVI RGB/DVI
VIDEO VIDEO
AUDIO IN AUDIO IN
COMPONENT
Y
Cb/Pb
Cr/Pr
PC card (not supplied)