E-47 – Nikon HT1000 User Manual

Page 47

Advertising
background image

E-47

Tools

Provides tools for setting sleep timer, capturing images and displaying
files or changing your background logo in a PC Card.

NOTE: The "Capture" and "PC Card Files" features are required for a PC card.

Using Sleep Timer

1. Select your desired time between 30 minutes and 16 hours: Off, 0:30,

1:00, 2:00, 4:00, 8:00, 12:00, 16:00.

2. Select “Set” and press the ENTER button on the remote control.

3. The remaining time starts counting down.

4. The projector will turn off after the countdown is complete.

NOTE:
• To cancel the preset time, set "Off" for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is turned off,

the "Projector will turn off in 3 minutes" message will be displayed on the
bottom of the screen.

Using Capture
Allows you to capture an image from a source that is currently being
displayed. The image is saved as JPEG in the PC card. When you se-
lect Capture from the menu, you will get a tool bar. You can capture an
image directly using the tool bar when the menu is not displayed.
See page E-28.

Using PC Card Files
The PC Card Files feature allows you to display a list of all the files
stored in the PC card so that you can select a file you want to display.
You can also sort files by file name or date, or display the file. See page
E-29.

Changing Background Logo
You can change the default background logo using the PC Card Files
feature. See page E-25 and 29.

NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP
are not available.

Help

Contents
Provides an online help about how to use the menus. An underlined link
means that you can move to an adjustment item directly.
Selecting the underlined link and pressing ENTER moves to the corre-
sponding adjustment item.

Information
Displays the status of the current signal, and the lamp and the projector
usage hours. This dialog box has three pages.
The information included are as follows:

NOTE: The progress indicator shows the percentage of remaining bulb life. The
value informs you of the amount of lamp and projector usage respectively.

Remaining Lamp Time Display
When the remaining lamp time reaches 0, the Remaining Lamp Time
bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on
regardless of whether the lamp mode is set to Normal or Eco.

[Page 1]
Source Name
Input Terminal
Entry No.
Horizontal Frequency
Vertical Frequency
Sync Polarity

[Page 2]
Signal Type
Video Type
Sync Type
Interlace

[Page 3]
Remaining Lamp Time (%)
Lamp Hour Meter (H)
Projector Usage (H)

Returning to Factory Default

The Factory Default feature allows you to change adjustments and set-
ting to the factory preset for source except the following:

All Data ................. Reset all the adjustments and settings for all the

signals to the factory preset except Remaining
Lamp Time, Lamp Hour Meter, Projector Usage,
Language, Background, Entry List, Communica-
tion Speed, LAN mode, Security and Password.
(To reset the lamp usage time, see “Clear Lamp
Hour Meter” on page E-42)

Including Entry List:
Also deletes all the signals in the Entry List and
returns to the factory preset.

Current Signal ....... Resets the adjustments for the current signal to

the factory preset levels.

All the items in "Volume", "Image Options (except
Zoom Position)" and "Picture Management" can
be reset.

Advertising