Nortel Networks i2021 Series - Manual (Page 28)

i2021 ISDN Teleset
22
Enter the second DN as a seven-digit number. Enter the Bearer Service
as Speech, and then press Save.
The third DN in the example has only one CA. That DN/CA will be
assigned to key 7. Press the Next softkey until there are no Call
Appearances lit. Press Change, select CA key 7, it will light. Enter the
third DN, 5554321.
In the example, DN three has a Bearer Service of Audio. Press the
Bearer softkey until the display shows Audio. Press the Save softkey to
save the entries. Press MENU to exit.
MANUALLY PROGRAMMING FEATURE KEYS
Most ISDN Teleset installations will have a number of switch features.
Common features are Conference, Drop, Transfer, Call Pickup, and Call
Forwarding. These features are usually assigned to the softkeys. Other
features may be assigned to the programmable hardkeys. As long as a
programmable hardkey is “Unassigned” it will work as a feature key.
To verify a key is “Unassigned”, press MENU, View, Key. Select the key
you wish to verify. If the key is programmed as a Speed Dial, simply clear
it. If the key is programmed as a Call Appearance, go to DN/CA and clear
it.
1 9
2 10
4 12
6 14
5 13
8 16
7 15
3 11