Nortel Networks i2021 Series - Manual (Page 40)

i2021 ISDN Teleset
34
2. If a hardkey lights, it means that key is already assigned a Speed Dial
number. Press the hardkey you wish to program as a Speed Dial key.
Each Speed Dial key will store 32 digits. The display will only show 21
digits of the number. The complete number can be viewed by using
the volume control key.
If a number is entered that exceeds the 21 digits displayed, the display
scrolls to the left and show the last 21 digits entered. The first of the
digits will be scrolled off of the display.
NOTE: If you select an unlit key that is not available, a Call
Appearance for example, the display will show “<Try
Another Key>”. After a few seconds the phone will
select the first available key automatically. If this key is
satisfactory, proceed with the programming. If this key is
not satisfactory, press the MORE key to abort the
selection. You will then be given the opportunity to
select another key.