Nortel Networks i2021 Series - Manual (Page 35)

i2021 ISDN Teleset
29
Press MENU to return to the startup screen. The SaVol key sets the
default level of the ringing pattern. The Ring Pattern level returns to this
volume setting if the Teleset power is reset. The Ringing Pattern volume
may be adjusted at any time by pressing the volume keys while the
Teleset is ringing. The Teleset will remember the volume setting until
power is reset.
2
ND
RING
The 2
nd
Ring option controls how the Teleset audibly reacts to an incoming
call on another Call Appearance when you are already off-hook on an
active call. The choices are Continuous Ring, Partial Ring, and No Ring.
With Continuous Ring, the Teleset will sound the 2
nd
Ring “beep” with
every ring cycle.
With Partial Ring, the Teleset will sound the 2
nd
Ring “beep” with a shorter
duration every other ring cycle.
With No Ring, there will be no audible ring during the ringing cycle.
To set the 2
nd
Ring option press MENU, MORE, Ring, 2ndRing
PRIMCA (PRIMARY CALL APPEARANCE)
Primary Call Appearances are Call Appearance locations you consider to
be your own. Do not confuse PrimCA locations with Primary Directory
NOTE In all cases the Call Appearance LED will flash, and the
display will continue to show the Calling Line ID if
available.