NETGEAR WPN802 - Manual (Page 13)

Introduction 2-1
202-10101-01, May 2005
Chapter 2
Introduction
The NETGEAR RangeMax™ Wireless Access Point WPN802 provides connectivity between
Ethernet wired networks and radio-equipped wireless notebook systems, desktop systems, print
servers, and other devices.This chapter describes the features of the NETGEAR RangeMax™
Wireless Access Point WPN802.
Key Features
The WPN802 Access Point is easy-to-use and provides the following features:
• RangeMax™ Multi-In, Multi-Out (MIMO) technology
• 802.11g wireless networking, with the ability to operate in 802.11g-only, 802.11b only, or
802.11b+g modes.
• Easy, Web-based setup for installation and management.
• Login capability.
• Front panel LEDs for easy monitoring of status and activity.
• Flash memory for firmware upgrades.
RangeMax™ Multi-In, Multi-Out (MIMO) Technology
Netgear’s RangeMax Multi-In, Multi-Out (MIMO) technology provides ten times more coverage
than standard 802.11g alone by eliminating “dead spots” in your area of coverage where you use
your wireless computers. Your whole house or office suite now becomes a “hot spot” without
requiring any range extenders, repeaters, or external antennas. RangeMax maintains your high
speed throughout your home, not just when you are close to your wireless access point.
Note: This manual provides information on the complete features as of the date of
publication. Earlier versions of this product may not have all the features presented in
this manual. Go to
http://kbserver.netgear.com/products/WPN802.asp where you will
find product firmware updates for your WPN802.