Rebooting the wpn802 access point, Figure 5-4: reboot ap dialog box, Select yes, and then click apply – NETGEAR WPN802 User Manual
Page 47: Viewing a list of available wireless stations, Figure 5-5: available wireless station list, Rebooting the wpn802 access point -5, Viewing a list of available wireless stations -5
Reference Manual for the NETGEAR RangeMax™ Wireless Access Point WPN802
Management and Information
5-5
202-10101-01, May 2005
Rebooting the WPN802 Access Point
You can reboot the wireless access point from the browser interface or by using the reset button on
the rear panel.
1. From the main menu of the browser interface, click the Reboot AP link under the Management
heading.
The Reboot AP dialog box appears:
Figure 5-4: Reboot AP dialog box
2. Select Yes, and then click Apply.
Viewing a List of Available Wireless Stations
The Available Wireless Station List contains a table of all IP devices associated with the wireless
access point in the wireless network defined by the Wireless Network Name (SSID).
From the main menu of the browser interface, click the Available Wireless Stations List link under
the Information Heading. The following screen opens:
Figure 5-5: Available Wireless Station List
For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the
device is allowed to communicate with the wireless access point or not).